Special cables

ZK7A02-3199-xxxx support connection cable

Special cables 1:

The ZK7A02-3199-xxxx support cable is used to connect the AMP8000 motor to an EtherCAT-capable engineering device outside a machine. This can be used to configure and parameterize the AMP8000 motor before it is used in a machine. 

Service cable for manual brake control ZK7A4-3184-8050

Special cables 2:

The pre-assembled cable is used to manually control the holding brake in case of service. The M8 connector is connected on the motor side. The two wires with pre-assembled ferrules are used to connect to the 24 V DC power supply.