Transport and storage
| |
Protect AMP8000 from damage During transport and storage, protect the distributed servo drive system from damage and observe the conditions. Damage may result in hazardous voltages being present on the housing or exposed components and can lead to serious or even fatal injuries. |
Notice | |
Avoid damage and resulting loss of warranty Observe the conditions and the following chapters on transport and storage. Failure to observe the conditions may result in damage to the distributed servo drive system and void the warranty. |
Notice | |
Avoid short-circuit due to moisture Condensed water can form during transport in cold weather or in case of extreme temperature differences. Make sure that no moisture collects in the distributed servo drive system. Equalize room temperatures slowly. Switch the components and modules on only when they are dry. If the distributed servo drive system is not completely dry, condensation can cause a short circuit when switching on and damage the components and modules. |
Notice | |
Damage due to removal of the protective cap The yellow protective cap on the shaft protects against mechanical damage and environmental influences. If you remove the protective cap, the shaft may be damaged.
|