Type key AMP80xx, AMP85xx

AMP8 a b c – d e f g

Explanation

AMP8

Distributed Servo Drive

a

Series

  • 0 = standard
  • 5 = increased mass moment of inertia

b

Flange size F

  • 3 = F3
  • 4 = F4
  • 5 = F5

c

Overall length

  • 1
  • 2
  • 3
  • 4

d

Winding code

A to Z

  • S = special winding

e

Shaft version

  • 0 = smooth shaft
  • 1 = shaft with groove and parallel key according to DIN 6885
  • 2 = shaft with radial shaft sealing ring IP65 and smooth shaft
  • 3 = shaft with groove and parallel key according to DIN 6885
  • 4 = shaft with radial shaft sealing ring IP65, smooth shaft and sealing air connection
  • 5 = shaft with radial shaft sealing ring IP65, groove, parallel key and sealing air connection

f

Feedback system

  • 1 = single-turn absolute encoder, resolution 24-bit, TwinSAFE STO,/SS1
  • 2 = multi-turn absolute encoder, resolution 24-bit, TwinSAFE STO/SS1
  • 3 = single-turn absolute encoder, resolution 24-bit, TwinSAFE Safe Motion
  • 4 = multi-turn absolute encoder, resolution 24-bit, TwinSAFE Safe Motion

g

Holding brake

  • 0 = without holding brake
  • 1 = with holding brake
  • 2 = with holding brake and M8 plug for manual brake release