During operation

Do not work on live electrical parts

Do not open any linear motors while they are live. Ensure that the protective conductor is properly connected. Never loosen electrical connections when live. Only work on linear motors when the device is switched off. Disconnect all components from the mains and protect them against unintentional reconnection.

Do not touch hot surfaces

Check the cooling of the surfaces with a thermometer. Do not touch the components during and immediately after operation. Allow the components to cool sufficiently after switching off.

Avoid overheating

Activate and monitor the temperature contact of the motor. Provide for sufficient cooling. Switch off the motor immediately if the temperature is too high.

Do not touch any moving or rotating components

Do not touch any moving or rotating components. Fasten all parts or components on the machine or plant.