Data for operation and environment

Notice

Operate linear motors only under the specified environmental conditions

Operate the linear motors only under the conditions for operation and the environment listed in this chapter. This ensures a long service life and proper operation.

Short-term or long-term operation outside of the specifications listed here may reduce the service life of the coil parts.

Beckhoff products are designed for operation under certain environmental conditions, which vary according to the product. The following specifications must be observed for operation and environment in order to achieve the optimum service life of the products.

Environmental requirements

  • Climate category - operation

3K3 according to EN 60721

  • Ambient temperature during operation

+ 5 °C to + 40 °C

  • Ambient temperature during transport

- 25 °C to + 70 °C, maximum fluctuation 20 K/hour

  • Ambient temperature during storage

- 25 °C to + 70 °C, maximum fluctuation 20 K/hour

  • Power derating

No power derating up to 1000 m installation altitude above sea level.

  • Installation altitude

At installation heights higher than 1000 m above sea level and 40 °C:

  •  6 % at 2000 m above sea level
    17 % at 3000 m above sea level
    30 % at 4000 m above sea level
    55 % at 5000 m above sea level
  • Permissible humidity during transport and storage

5 % to 95 % relative humidity, non-condensing

Specifications for intended use

  • Ventilation

Air-cooled or water-cooled

  • Insulation material class

B

  • Protection class

IP64

  • Vibration resistance

50 g, 10...2000 Hz according to EN 60068-2-6

  • Shock resistance

100 g, 6 ms according to EN 60068-2-27

  • EMC requirements

conforms to EN 61800-3:2004 + A1:2012

  • Approvals

CE, cURus, EAC, UKCA

Further Information