Connecting the hoses

Note

Manufacturing the hoses

The hoses must match the chosen connectors.


The connectors must be free from oil and grease when the hoses are attached. The minimum flow rate is 1 l/min, requiring a pressure drop of less than 1 bar. It is also possible to connect the two cooling lines in parallel. This method of connection does reduce the pressure drop, although only when cavitation-free Y-branches with a diameter of 6-8 mm are used.

Connecting the hoses 1:
Connecting the hoses 2:


The connections of the cooling water pipe can extend beyond the dimensions of the motor part. This must be observed when designing the carriage.