NP005

Mechanical data	1-stage
Ratio i	4	5	7	8	10
Efficiency under full load ŋ [%]	97
Mass moment of inertia J₁ [kgcm²] Based on the drive	0.02 to 0.14
Running noiseL_PA [dB/A] i = 10/n₁ = 3000 rpm without load	≤ 58
Weight with adapter platem [kg] Depending on the clamping hub diameter and selected adapter plate	0.70 to 1.20
Torques and speeds
Rated torque at the output T_2N [Nm]	5.10	6.50		6
Acceleration torque T_2B[Nm] Maximum 1000 cycles/hour	11	14		13
Maximum torque T_2a[Nm]	18	22		21
EMERGENCY STOP torqueT_2Emer [Nm] 1000 x during gear unit service life, at T_2a > T_2Emer maximum T_2Emer permitted	26
Mean drive speedn_1N [rpm] T_1N & 20 °C ambient temperature	3800		4300
Maximum drive speed n_1Max [rpm]	10000
No-load running torque T₀₁₂ [Nm]	0.10	0.009	0.008
Torsion and forces
Maximum torsional backlash j_t [arcmin]	Standard ≤ 10
Maximum torsional rigidity C_t21 [Nm/arcmin]	1.20			0.85
Maximum axial forceF_2AMax[N] In relation to the shaft center at the output, n₂ = 150 rpm	700
Maximum radial forceF_2RMax[N] In relation to the shaft center at the output, n₂ = 150 rpm	800
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to + 40
Clamping hub diameter [mm]
Standard	8 Z; 9 A; 11 B
Large	14 C
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016

Mechanical data	2-stage
Ratio i	16	20	25	28	35	40	50	64	70	100
Efficiency under full load ŋ [%]	95
Mass moment of inertia J₁ [kgcm²] Based on the drive	0.02 to 0.13
Running noiseL_PA [dB/A] i = 10/n₁ = 3000 rpm without load	≤ 58
Weight with adapter platem [kg] Depending on the clamping hub diameter and selected adapter plate	0.90 to 1.60
Torques and speeds
Rated torque at the output T_2N [Nm]	5.10		6.50	5.10	6.50	5.10	6.50	6	6.50	6
Acceleration torque T_2B[Nm] Maximum 1000 cycles/hour	11		14	11	14	11	14	13	14	13
Maximum torque T_2a[Nm]	18		22	18	22	18	22	21	22	21
EMERGENCY STOP torqueT_2Emer [Nm] 1000 x during gear unit service life, at T_2a > T_2Emer maximum T_2Emer permitted	26
Mean drive speedn_1N [rpm] T_1N & 20 °C ambient temperature	4000			4300
Maximum drive speed n_1Max [rpm]	10000
No-load running torque T₀₁₂ [Nm]	0.11	0.10		0.009		0.008
Torsion and forces
Maximum torsional backlash j_t [arcmin]	Standard ≤ 13
Maximum torsional rigidity C_t21 [Nm/arcmin]	1.20						0.85		1.20	0.85
Maximum axial forceF_2AMax[N] In relation to the shaft center at the output, n₂ = 150 rpm	700
Maximum radial forceF_2RMax[N] In relation to the shaft center at the output, n₂ = 150 rpm	800
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to + 40
Clamping hub diameter [mm]
Standard	8 Z; 9 A; 11 B
Large	14 C
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016

Further Information