TP500 MA

Mechanical data	1-stage	2-stage				3-stage
Ratio	5.5	22	27.5	38.5	55	66	88	110	154	220
Efficiency under full load ŋ [%]	95	93
Running noise L_PA[dB] at n1 = 3000 rpm without load	≤ 70	≤ 63				≤ 60
Service life L_h [h]	> 20000
Weight [kg] Depending on the clamping hub diameter and adapter plate	80	80				89
Mass moment of inertia J₁ [kgcm²] Based on the drive Letters = specification of the clamping hub diameter
K = 38 mm	---	---	---	---	---	17.9	13.5	11.9	10.5	9.7
M = 48 mm	---	43.8	36.9	30.5	27	32.7	28.3	26.7	25.2	34.4
O = 60 mm	175	---	---	---	---	---	---	---	---	---
Torques and speeds
Maximum torque T_2a[Nm]	10450
Nominal output torque T_2N [Nm]; At n_1N	4313	5068	4980	5057	5325	4941	7464	7396	7546	7907
Maximum acceleration torque T_2B [Nm] Maximum 1000 cycles per hour	9600	10450
EMERGENCY STOP torqueT_2Em.stop [Nm] Possible 1000 times during the service life of the gear unit	18750	25000
Nominal input speedn_1N [min^-1]	900	1500
Maximum input speed n_1Max [min^-1]	3125	4375
Idle torque T₀₁₂ [Nm] Based on the drive	27	11	10	8.9	7.8	6.8	5	4.7	3.6	3
Torsion and forces
Maximum torsional backlash j_t [arcmin]	Standard ≤ 3 / Reduced ≤ 1.5
Maximum torsional rigidity C_t21[arcmin]	2000	2000	2000	1950	1900	1800	1800	1800	1800	1800
Maximum axial forceF_2AMax[N] In relation to output shaft center	50000
Maximum breakdown torque M_2Max [Nm]	6600	9500
Tilting rigidity C_2K[Nm/arcmin]	9480
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to +40
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016
Seal	Sealed bearing disks