TP025 MA

Mechanical data	2-stage				3-stage
Ratio	22	27.5	38.5	55	66	88	110	154	220
Efficiency under full load ŋ [%]	94
Running noise L_PA[dB] at n1 = 3000 rpm without load	≤ 58				≤ 56
Service life L_h [h]	> 20000
Weight [kg] Depending on the clamping hub diameter and selected adapter plate	5.6				6.1
Mass moment of inertia J₁ [kgcm²] Based on the drive Letters = specification of the clamping hub diameter
E = 19 mm	0.87	0.7	0.6	0.55	0.63	0.56	0.53	0.51	0.5
G = 24 mm	2.39	2.22	2.12	2.07	---	---	---	---	---
Torques and speeds
Maximum torque T_2a[Nm]	583				525
Nominal output torque T_2N [Nm] At n_1N	312	314	371	413	260	276	296	330	364
Maximum acceleration torque T_2B [Nm] Maximum 1000 cycles per hour	530				480
EMERGENCY STOP torqueT_2Em.stop [Nm] Possible 1000 times during the service life of the gear unit	1200
Nominal input speedn_1N [min^-1]	3500				4000
Maximum input speed n_1Max [min^-1]	7500
Idle torque T₀₁₂ [Nm] Based on the drive	1	0.87	0.78	0.7	0.62	0.52	0.44	0.32	0.27
Torsion and forces
Maximum torsional backlash j_t [arcmin]	≤ 1
Maximum torsional rigidity C_t21[arcmin]	105	105	105	100	95	95	95	95	95
Maximum axial forceF_2AMax[N] In relation to the shaft center at the output	4800
Maximum breakdown torque M_2Max [Nm]	550
Tilting rigidity C_2K[Nm/arcmin]	550
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to +40
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016
Seal	Sealed bearing disks