SP210 MF

Mechanical data	1-stage
Ratio	3	4	5	7	8	10
Efficiency under full load ŋ [%]	97
Running noise L_PA[dB] at n1 = 3000 rpm without load	≤ 64
Service life L_h [h]	> 20000
Weight [kg] Depending on the clamping hub diameter and selected adapter plate	56
Mass moment of inertia J₁ [kgcm²] Based on the drive Letters = specification of the clamping hub diameter
N = 55 mm	139	94.30	76.90	61.50	61.50	53.10
Torques and speeds
Rated torque at the output T_2N [Nm] at n_1N	1536	1895	1767	1731	1631	1708
Maximum acceleration torque T_2B [Nm] Maximum 1000 cycles per hour	1920	3000		2880	2280
EMERGENCY STOP torqueT_2Emer [Nm] Possible 1000 times during the service life of the gear unit	5900
Nominal input speedn_1N [min^-1]	1200		1500	1700	2000
Maximum input speed n_1Max [min^-1]	3000
Idle torque T₀₁₂ [Nm] Based on the drive	26	19	15	8.80	8.80	6.40
Torsion and forces
Maximum torsional backlash j_t [arcmin]	Standard ≤ 3 / Reduced ≤ 1
Maximum torsional rigidity C_t21[arcmin]	400
Maximum axial forceF_2AMax[N] In relation to the shaft center at the output	30000
Maximum lateral forceF_2QMax[N] In relation to the shaft center at the output	21000
Maximum breakdown torque M_2Max [Nm]	3100
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to +40
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016
Seal	Sealed bearing discs

Mechanical data	2-stage
Ratio	16	20	25	28	32	35	40	50	64	70	100
Efficiency under full load ŋ [%]	94
Running noise L_PA[dB] at n1 = 3000 rpm without load	≤ 57
Service life L_h [h]	> 20000
Weight [kg] Depending on the clamping hub diameter and selected adapter plate	53
Mass moment of inertia J₁ [kgcm²] Based on the drive Letters = specification of the clamping hub diameter
M = 48 mm	34.50	31.50	30.80	30		29.70	28.50	28.30		28.10	28
Torques and speeds
Rated torque at the output T_2N [Nm] at n_1N	1274	1266	1567	1294	2200	1599	1358	1679	1634	1965	1634
Maximum acceleration torque T_2B [Nm] Maximum 1000 cycles per hour	2880	3000		2880			2840	2880	2043	2457	2043
EMERGENCY STOP torqueT_2Emer [Nm] Possible 1000 times during the service life of the gear unit	5900
Nominal input speedn_1N [min^-1]	2500									3000
Maximum input speed n_1Max [min^-1]	4500
Idle torque T₀₁₂ [Nm] Based on the drive	5.60	5.20	4.80	4.50		3.60	3.40	3	3	2.60	2.40
Torsion and forces
Maximum torsional backlash j_t [arcmin]	Standard ≤ 5 / Reduced ≤ 3
Maximum torsional rigidity C_t21[arcmin]	400
Maximum axial forceF_2AMax[N] In relation to the shaft center at the output	30000
Maximum lateral forceF_2QMax[N] In relation to the shaft center at the output	21000
Maximum breakdown torque M_2Max [Nm]	3100
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to +40
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016
Seal	Sealed bearing discs