After operation

Risk of injury due to uncontrolled movement of components

The components of the drive system may perform uncontrolled movements after the power supply has been switched off and cause serious injury.

• Make sure that all moving parts on the machine come completely to a standstill

Serious injuries due to electrical voltage!

Even after the mains voltage has been switched off, a life-threatening DC link voltage may remain present for up to 30 minutes. The following steps must be taken before removing the supply line:

• Wait until the DC link is discharged

Increased attention in the case of vertical axes!

When commissioning vertical axes, the risk consideration described above is to be carried out with particular care. An uncontrolled movement can mean the sudden falling down of a load in this case.

Caution – Risk of injury!

Basically, electronic devices are not fail-safe. The machine manufacturer is responsible for ensuring that the connected motors and the machine are brought into a safe state in the event of a voltage outage in the drive system.