Cleaning

WARNING

Carrying out cleaning work during operation can lead to serious or fatal injuries

Basically, electronic devices are not fail-safe.

For cleaning work, bring the connected electric cylinders and the machine into a safe state.
De-energize the connected electric cylinders and the machine.

Notice

Extreme soiling can lead to failure

Contamination, dust or chips can have a negative effect on the function of the components.

Protect the components and especially the spindle from contamination.
Clean the components regularly.

Notice

Damage to the electric cylinder

Penetration of cleaning liquid into the electric cylinder by dipping or spraying can result in damage to the electric cylinder.

Only wipe the electric cylinder with a cleaner and a cloth.
Do not immerse the electric cylinder

Housing

Clean the housing components carefully with a damp cloth or a brush. Excess grease or soiling can be wiped off with a dry, lint-free cloth. Use grease-dissolving and non-aggressive cleaning agents for cleaning. Isopropanol cleaning agent can be used for cleaning.

Non-approved cleaning agents:

Non-approved cleaning agents	Chemical formula
Aniline hydrochloride	C₆H₅NH₂HCI
Bromine	Br₂
Sodium hypochlorite; bleaching solution	NaCIO
Mercury (II) chloride	HgCl₂
Hydrochloric acid	HCI

Output rod

The output rod must remain free of cleaning agents. If necessary, excess grease or oil can be wiped off with a lint-free cloth.

Avoid contact with cleaning agents.
Do not use any cleaning agents that may adhere to the spindle thread and enter the electric cylinder or the spindle nut during the working stroke.
In the case of vertical installation, ensure that there is no cleaning agent on the cylinder opening.