System requirements

Notice

Check and update software version

The automatic securing of the end positions of the electric cylinder requires the following TwinCAT 3 Drive Manger 2 software version:
TE5910 | Version 1.1.44.0 or higher

Product defect possible, as the end positions may not be secured.

  • Check the software status of TwinCAT 3 Drive Manger 2.
  • Update to the required version.

Notice

Check and update firmware version

The automatic securing of the end positions of the electric cylinder requires the following firmware version of the servo drive:
AX8000 | axis module FW 1.05 Build 8 or higher
AX5000 | servo drive FW 2.15 or higher

Risk of defect. The end positions may not be secured.

  • Check the firmware version of the servo drive
  • Update to the required version
System requirements 1:

TE5950 setup download

You can find the current setup file on the product website

TE5950 | TwinCAT 3 Drive Manager 2