Programmierbeispiel
Programmierbeispiel
Rettungsfunktion - Gewindebohren (M6 Rechtsgewinde)
#VAR
; input parameters:
V.L.DrillingDepth = 20 (Depth of the failed cycle)
V.L.ThreadPitch = 1 (pitch of the thread)
V.L.SpindleSpeed = 200 (spindle rotation speed)
V.L.TreadType = -1 (Tread type (Standard=1 (Right-hand thread)))
V.L.RefCycle = "SysDrillTapping" (Reference cycle)
#ENDVAR
; technology data
G17 G90
;cycle call
L CYCLE [NAME=SysDrillEscape.ecy \
@P4 = V.L.DrillingDepth \
@P7 = V.L.ThreadPitch \
@P24 = V.L.SpindleSpeed \
; @P18 = V.L.TreadType \
@P100 = V.L.RefCycle \
]
M30
Programmierbeispiel
Rettungsfunktion - Bohrgewindefräsen
#VAR
; input parameters:
V.L.DrillingDepth = 20 (Depth of the failed cycle)
V.L.PosX = 30 (Position in X)
V.L.PosY = 20 (Position in Y)
V.L.RefCycle = "SysDrillThreadMilling" (Reference cycle)
V.L.RetractionFeed = 200 (Retraction feedrate)
#ENDVAR
; technology data
G17 G54 G90
;cycle call
L CYCLE [NAME=SysDrillEscape.ecy \
@P4 = V.L.DrillingDepth \
@P40 = V.L.PosX \
@P41 = V.L.PosY \
@P100 = V.L.RefCycle \
@P132 = V.L.RetractionFeed \
]
M30
Programmierbeispiel
Rettungsfunktion - Einfacher Rückzug in Z
#VAR
; input parameters:
V.L.DrillingDepth = 20 (Depth of the failed cycle)
V.L.RefCycle = "SysDrill" (Reference cycle)
V.L.RetractionFeed = 200 (Retraction feedrate)
#ENDVAR
; technology data
G17 G54 G90
;cycle call
L CYCLE [NAME=SysDrillEscape.ecy \
@P4 = V.L.DrillingDepth \
@P100 = V.L.RefCycle \
@P132 = V.L.RetractionFeed \
]
M30