E_LON_switch_state_t

Genutzt durch: SNVT_switch_2

TYPE E_LON_switch_state_t :
(
  eLON_SW_NUL                  := -1,
  eLON_SW_SET_OFF              := 0,
  eLON_SW_SET_ON               := 1,
  eLON_SW_REPORT_OFF           := 2,
  eLON_SW_REPORT_ON            := 3,
  eLON_SW_TOGGLE_STATE         := 4,
  eLON_SW_SET_LEVEL            := 5,
  eLON_SW_INCREASE_LEVEL       := 6,
  eLON_SW_DECREASE_LEVEL       := 7,
  eLON_SW_RECALL_SCENE         := 8,
  eLON_SW_STORE_SCENE          := 9,
  eLON_SW_LEARN_SCENE          := 10,
  eLON_SW_SET_OCCUPIED         := 11,
  eLON_SW_SET_UNOCCUPIED       := 12,
  eLON_SW_SET_MULTIPLIER       := 13,
  eLON_SW_ENABLE_GROUP         := 14,
  eLON_SW_DISABLE_GROUP        := 15,
  eLON_SW_WINK                 := 16,
  eLON_SW_RESET                := 17,
  eLON_SW_RESET_ENERGY_USAGE   := 18,
  eLON_SW_RESET_RUNTIME        := 19,
  eLON_SW_INCREASE_HUE         := 20,
  eLON_SW_DECREASE_HUE         := 21,
  eLON_SW_SET_BUTTON           := 22,
  eLON_SW_SET_FAN_UP           := 32,
  eLON_SW_SET_FAN_DOWN         := 33,
  eLON_SW_TOGGLE_FAN_DIRECTION := 34,
  eLON_SW_INCREASE_FAN_LEVEL   := 35,
  eLON_SW_DECREASE_FAN_LEVEL   := 36,
  eLON_SW_SET_FAN_ON           := 37,
  eLON_SW_SET_FAN_OFF          := 38,
  eLON_SW_TOGGLE_FAN_STATE     := 39,
  eLON_SW_MOVE_OPEN            := 48,
  eLON_SW_MOVE_CLOSED          := 49,
  eLON_SW_SET_ANGLE            := 50,
  eLON_SW_ROTATE_OPEN          := 51,
  eLON_SW_ROTATE_CLOSED        := 52,
  eLON_SW_STOP                 := 53,
  eLON_SW_SET_STANDBY          := 54,
  eLON_SW_TOGGLE_STANDBY       := 55,
  eLON_SW_SET_POSITION         := 56,
  eLON_SW_REPORT_POSITION      := 57,
  eLON_SW_REPORT_FAN_LEVEL     := 58
)
END_TYPE 

eLON_SW_NUL: Invalid value

eLON_SW_SET_OFF: Set the state to off; ignored for blinds, drapes, shades, and fans

eLON_SW_SET_ON: Set the state to on; ignored for blinds, drapes, shades, and fans

eLON_SW_REPORT_OFF: Report that the state is off; output only; ignored for input

eLON_SW_REPORT_ON: Report that the state is on; output only; ignored for input

eLON_SW_TOGGLE_STATE: Toggle on-off state; same action as SW_SET_OFF if the on/off state was on, and SW_SET_ON if the on/off state was off; ignored for blinds, drapes, shades, and fans

eLON_SW_SET_LEVEL: Set the level to the specified value; ignored for blinds, drapes, shades, and fans

eLON_SW_INCREASE_LEVEL: Increase the level by the specified value; ignored for blinds, drapes, shades, and fans

eLON_SW_DECREASE_LEVEL: Decrease the level by the specified amount; ignored for blinds, drapes, shades, and fans

eLON_SW_RECALL_SCENE: Recall the state and level from the specified scene

eLON_SW_STORE_SCENE: Store setting for the specified scene

eLON_SW_LEARN_SCENE: Learn setting for the specified scene

eLON_SW_SET_OCCUPIED: Set the occupancy state

eLON_SW_SET_UNOCCUPIED: Clear the occupancy state

eLON_SW_SET_MULTIPLIER: Set a multiplier for the level for 60 minutes; ignored for blinds, drapes, shades, and fans

eLON_SW_ENABLE_GROUP: Enable a group; all groups are enabled by default

eLON_SW_DISABLE_GROUP: Disable a group

eLON_SW_WINK: Blink state (toggle on-off state; pause; toggle on-off state again

eLON_SW_RESET: Reset scene definitions, multiplier, occupancy state, group enable flags, and settings to factory defaults

eLON_SW_RESET_ENERGY_USAGE: Reset energy usage value to zero

eLON_SW_RESET_RUNTIME: Reset runtime value to zero

eLON_SW_INCREASE_HUE: Increase color hue

eLON_SW_DECREASE_HUE: Decrease color hue

eLON_SW_SET_BUTTON: Trigger the actions for pressing and releasing the button specified in the value field

eLON_SW_SET_FAN_UP: Set ceiling fan direction to up, with specified level

eLON_SW_SET_FAN_DOWN: Set ceiling fan direction to down, with specified level

eLON_SW_TOGGLE_FAN_DIRECTION: Toggle fan up-down direction

eLON_SW_INCREASE_FAN_LEVEL: Increase fan speed by the setting

eLON_SW_DECREASE_FAN_LEVEL: Decrease fan speed by the setting

eLON_SW_SET_FAN_ON: Set the fan state to on

eLON_SW_SET_FAN_OFF: Set the fan state to off

eLON_SW_TOGGLE_FAN_STATE: Toggle the fan on-off state

eLON_SW_MOVE_OPEN: Move blinds, drapes, or shades open by the setting

eLON_SW_MOVE_CLOSED: Move blinds, drapes, or shades closed by the setting

eLON_SW_SET_ANGLE: Set the rotation angle of blinds to the setting

eLON_SW_ROTATE_OPEN: Rotate blinds open by the setting

eLON_SW_ROTATE_CLOSED: Rotate blinds closed by the setting

eLON_SW_STOP: Stop any motion of blinds, drapes, or shades

eLON_SW_SET_STANDBY: Set Standby mode

eLON_SW_TOGGLE_STANDBY: Toggle the standby state

eLON_SW_SET_POSITION: Set blinds, drapes, or shades to the specified position; 100% is fully open, 0% is fully closed

eLON_SW_REPORT_POSITION: Report the position of blinds, drapes, or shades output only; ignored for input

eLON_SW_REPORT_FAN_LEVEL: Report the fan speed in percent of full level output only; ignored for input