718F, Commutation offset command parameter error
Commutation offset command method is not suitable for automatic commutation offset calibration.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
718F |
29071 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
Axis is inoperable |
Execute Reset-Command (Fault reset). |
|
Possible Causes |
Solutions |
|---|---|
|
The selected commutation offset command method is not sufficient for automatic commutation offset calibration. |
Check commutation offset command parameter settings and chose a suitable method. |
Internal: 0x718F, Commutation offset command parameter error