8190, Axis fault reset command is not possible - internal hardware error
The Axis received a fault reset command but a reset is not possible because an internal hardware error has occurred.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
8190 |
33168 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
Closed loop ramp |
A reset is not possible. The drive detected a fatal hard- or software error. |
|
Possible Causes |
Solutions |
|---|---|
|
There is an internal hardware error. |
Disconnect the servo drive from the mains (including the 24 V power supply) and start a new attempt. If this error occurs repeatedly, please call our support. |
Internal: 0x8190, Axis fault reset command is not possible - internal hardware error