8183, Controlword output cycle counter monitoring
The output cycle counter of the controlword didn't increment for at least two cycles and the monitoring function is activated.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
8183 |
33155 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
Closed loop ramp |
Execute Reset-Command (Fault reset). |
|
Possible Causes |
Solutions |
|---|---|
|
The Output cycle counter monitoring is enabled and detected an error. |
Check if the output cycle counter function is enabled in your NC. Check your EtherCAT realtime status. |
Internal: 0x8183, Controlword output cycle counter monitoring