2382, Continuous over current (device output side) Phase W
The drive software detected an overcurrent on the motor phases W.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
2382 |
9090 |
|
Class |
Type |
|---|---|
|
Error |
Overcurrent error |
|
Standard Reaction |
Reset |
|---|---|
|
Torque off |
Execute Reset-Command (Fault reset). |
|
Possible Causes |
Solutions |
|---|---|
|
Short circuit in the motor cable. |
Check the motor cable |
|
Short circuit in the motor winding. |
Check the motor winding with an high voltage test or check the winding resistance. |
Internal: 0x2382, Continuous over current (device output side) Phase W