5587, Missing factory settings
By the initialization the factory settings could not be found in eeprom.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
5587 |
21895 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
PSM is not ready to operate and transition PREOP to SAFEOP disabled |
A reset is not possible. The PSM detected a fatal hard- or software error. |
|
Possible Causes |
Solutions |
|---|---|
|
A internal hard- or software failure happened, while reading data from eeprom. |
Switch off the mains voltage and the 24V-supply. Switch on them again. If this error happens repeatedly, please contact your competent Beckhoff office. |
|
Factory settings are missing in eeprom. |
Please contact your competent Beckhoff office. |
Internal: 0x5587, Missing factory settings