S-0-0169 Probe control parameter

The parameter specifies which edges are activated by the command S-0-0170.

Attributes

Name	Value
Datatype	binary
Data length in bit	16
Decimal point	0
Min value	-
Default	0.0
Max value	-
Unit	-
Changeable in EtherCAT state	PreOp, SafeOp, Op
Cyclic transfer	No
Device parameter	No
Related to interface revision	No

Bit pattern:

Bit	Meaning
0	Probe 1 positive edge Probe 1, positive edge 0 = positive edge is not active 1 = positive edge is active
1	Probe 1 negative edge Probe 1 negative edge 0 = negative edge is not active 1 = negative edge is active
2-4	Reserved
5	Mode probe 1 Mode probe 1 0 = individual measurement 1 = continuous measurement
6-7	Reserved
8	Auto activation Auto activation 0 = activation with S-0-0170 1 = auto-activation of SafeOp after Op
9 - 15	Reserved

	For further information please look into the involved IDN: S-0-0170

	Additional functional description AX5000 / Probe Unit