8782, Configured Sync1 Cycle Time is not a multiple of the Sync0 Cycle Time
The configured Sync1 Cycle Time is not a multiple of the Sync0 Cycle Time.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
8782 |
34690 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
Axis is inoperable |
Execute Reset-Command (Fault reset). |
|
Possible Causes |
Solutions |
|---|---|
|
The Cycle Time of your NC-Task has to be a multiple of the drives Sync0 Cycle Time. |
Please set your Task to a valid Cycle Time. |
Internal: 0x8782, Sync Controller: Configured Sync1 Cycle Time (%u ns) is not a multiple of the Sync0 Cycle Time (%u ns).