8780, Configured Sync1 Cycle Time is above Maximum
The configured Sync1 Cycle Time is above the maximum.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
8780 |
34688 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
Axis is inoperable |
Execute Reset-Command (Fault reset). |
|
Possible Causes |
Solutions |
|---|---|
|
The Cycle Time of your NC-Task is above the supported maximum value of this drive. |
Please set your Task to a shorter Cycle Time. |
Internal: 0x8780, Sync Controller: Configured Sync1 Cycle Time (%u ns) is above Maximum (%u ns).