FB_RemoveDir

The function block FB_RemoveDir can be used to delete a directory from the data storage device. A directory containing files cannot be deleted.

	This function block is only suitable for logging in real-time to a limited extent. For good performance, we recommend using the TF3500 TwinCAT Analytics Logger product, which is subject to a charge.

Inputs

VAR_INPUT
    sNetId    : T_AmsNetId;
    sPathName : T_MaxString;
    ePath     : E_OpenPath := PATH_GENERIC; (* Default: generic file path*)
    bExecute  : BOOL;
    tTimeout  : TIME := DEFAULT_ADS_TIMEOUT;
END_VAR

Name	Type	Description
sNetId	T_AmsNetId	String containing the AMS network ID of the target device to which the ADS command is addressed (type: T_AmsNetId).
sPathName	T_MaxString	Directory name to be deleted. When the function block is called, only one directory can be deleted. The last component of sPathName must contain the directory name to be deleted (type: T_MaxString).
ePath	E_OpenPath	This input can be used to select a TwinCAT system path for deleting the directory on the target device (type: E_OpenPath).
bExecute	BOOL	The function block is activated by a rising edge at this input.
tTimeout	TIME	States the length of the timeout that may not be exceeded by execution of the ADS command.

Outputs

VAR_OUTPUT
    bBusy  : BOOL;
    bError : BOOL;
    nErrId : UDINT;
END_VAR

Name	Type	Description
bBusy	BOOL	When the function block is activated, this output is set to TRUE and remains set until feedback is received. As long as bBusy is TRUE, no new command can be created.
bError	BOOL	If an error occurs during command execution, this output is set, once the bBusy output has been reset.
nErrId	UDINT	Returns the ADS error code or the command-specific error code when the bError output is set.

Command-specific error code	Possible cause
0x70C	Folder not found or invalid sPathName or ePath parameter.

Example in ST:

See description of FB_CreateDir.

Requirements

Development environment	Target system type	PLC libraries to include (Category group)
TwinCAT v3.1.0	PC or CX (x86, x64, ARM)	Tc2_System (System)