Parameterization and commissioning
This documentation uses Profibus devices to illustrate the commissioning procedure. The configuration options shown in this section can be used for all Embedded PCs with Profibus interface.
The following devices are used in this documentation:
- CX2020-M310 (Embedded PC with optional Profibus master interface, D-sub socket, 9-pin)
- CX2500-B310 (Embedded PC with fieldbus module CX2500-B310 Profibus slave, D-sub socket, 9-pin)
- BK3100 (Profibus slave, D-sub socket, 9-pin)
The TwinCAT 2 or TwinCAT 3 software is used for configuring the devices.
For further information see the TwinCAT 2 and TwinCAT 3 documentation, which is available from the Beckhoff website:
www.beckhoff.de