KL6031 - Common Settings
Common Settings tab for parameterization of the KL6031.
General
Take Settings for all channels of this terminal
The settings made are adopted for all channels of the terminal (default: deactivated).
Process Data Length (R34.7)
Here, you can set the user data length (3, 5 or 22 bytes) of the process data image (default: 22 bytes).
Set Factory Settings (R7)
Here, you can restore the terminal's factory settings and save them with "Apply".
Communication Parameters
- RTS/CTS activated (R34.0),
(default: activated) - Alternative output format (R34.1),
(default: deactivated) - Status byte one cycle later (R34.2),
(default: deactivated) - XON/XOFF supported sending data (R34.3),
(default: deactivated) - XON/XOFF supported receiving data (R34.4),
(default: deactivated) - Send FIFO data continuously (R34.6),
(default: deactivated) - Extended process data interface (R34.7),
(set automatically) - Transfer rate optimization (R34.8),
(default: activated)