Introduction and contact assignment
HD Bus Terminals, 16-channel digital output 24 VDC, 0.5 A
The KL2809 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The KL2809 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The Bus Terminal contains 16 channels, whose signal states are displayed by LEDs. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the KL2809 or KL2889. The power contacts are looped through.
The outputs of the KL2809 are fed via the 24 V power contact and the outputs of the KL2889 via the 0 V power contact. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.
The HD Bus Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block. They are particularly suitable for space-saving use in control cabinets.
KL2809, KL2889 – LEDs
LED | Color | Meaning | |
---|---|---|---|
OUTPUT 1- 16 | green | off | No output signal |
on | - Output signal 24 VDC (KL2809) |
KL2809, KL2889 – contact assignment
Terminal point | Description | |
---|---|---|
Name | No. | |
Output 1 | 1 | Output 1 |
Output 2 | 2 | Output 2 |
Output 3 | 3 | Output 3 |
Output 4 | 4 | Output 4 |
Output 5 | 5 | Output 5 |
Output 6 | 6 | Output 6 |
Output 7 | 7 | Output 7 |
Output 8 | 8 | Output 8 |
Output 9 | 9 | Output 9 |
Output 10 | 10 | Output 10 |
Output 11 | 11 | Output 11 |
Output 12 | 12 | Output 12 |
Output 13 | 13 | Output 13 |
Output 14 | 14 | Output 14 |
Output 15 | 15 | Output 15 |
Output 16 | 16 | Output 16 |