KL2502, KL2512 - Dual Channel Pulse Width Output Terminals, 24 V DC

Mapping in the Bus Coupler

 

As already described in the Terminal Configuration chapter, each Bus Terminal is mapped in the Bus Coupler. This mapping is usually done with the default setting in the Bus Coupler / Bus Terminal. The KS2000 configuration software or a master configuration software (e.g. ComProfibus or TwinCAT System Manager) can be used to change this default setting.

If the terminals are fully evaluated, they occupy memory space in the input and output process image.

The following tables provide information about how the terminals map themselves in the Bus Coupler, depending on the parameters set.

 
 

The KL2502 is mapped with 6 bytes of input and output data.

 
Additional information
KL2502