EtherCAT P

Note
Defect possible through parallel connection.

Do not connect EtherCAT P outputs in parallel.

EP9224-0037 converts the incoming EtherCAT signal into an EtherCAT P signal by combining the EtherCAT signal with the applied supply voltages. The EtherCAT P signal is available at four output ports: X52, X53, X54, X55.

Electrical isolation

The grounds of the control voltage (GNDS) and peripheral voltage (GNDP) are electrically isolated from each other in order to ensure the electrical isolation of the peripheral devices on UP from the control voltage.