Linking an NC axis with EP7047
This step can usually be skipped If you have carried out the commissioning in accordance with this documentation, an NC axis has already been linked to EP7047-1032. See chapter Integrating EP7047 into a TwinCAT project. |
- 1. In the Solution Explorer: Double-click "Axis n".
- 2. Click on the "Settings" tab.
- 3. Click "Link to I/O".
- A dialog box opens.
- 4. Select EP7047 and click "OK".
Note: If EP7047 is not available for selection here, please check:
- Is EP7047 included in the "I/O" section?
- Is a predefined "Positioning interface ..." process image selected?
- The process data from EP7047 are linked to the axis.