Disassembling the power supply unit
The CX2000 Embedded PC series is a modular system and enables individual modules to be replaced or removed quite easily. This section describes how to remove devices from the CX2000 Embedded PC series.
Requirements:
- All cables were removed from the embedded PC.
Dismantle the embedded PC as follows:
- 1. Release the DIN rail mounting by pushing the latches outwards with a screwdriver.
- 2. Pull the orange strap on the power supply unit and gently remove the device from the DIN rail.
- 3. Lift the bar clips with the aid of a screwdriver and remove the bar clips.
- Once the bar clips have been removed successfully, the modules can be separated from each other.
Disposal
The device must be fully dismantled in order to dispose of it. Electronic components must be disposed of according to national electronic waste regulations.