Dismantling the UPS

Notice

Electrical voltage

If the power supply is switched on during dismounting, this can lead to damage to the UPS. Switch off the power supply during dismounting.

This chapter shows how to disassemble the UPS and thus remove it from the DIN rail. Shut down the industrial PC connected to the UPS so that the UPS is switched off.

Requirements:

Switch off the power supply.

Dismantle the UPS as follows:

1. Push the UPS upwards.
Dismantling the UPS 1:

As soon as you push the UPS upwards, the lower springs of the DIN rail adapters give way. This allows the UPS to be released from the top edge of the DIN rail.

2. Tilt the UPS forwards.
Dismantling the UPS 2:

The UPS can be removed from the DIN rail.