F74A, Feedback "general": Parameter invalid
A parameter error occurred.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
F74A |
63306 |
|
Class |
Type |
|---|---|
|
Error |
Parameter error |
|
Standard Reaction |
Reset |
|---|---|
|
The power stage is already switched off |
Execute Reset-Command (S-0-0099). |
|
Possible Causes |
Solutions |
|---|---|
|
IDN "P-0-0150 Parameter channel-->Number of clock cycles to get single-turn position or absolute position" = 0 |
Exchange the parameter. |
|
Sum of the Parameter IDN "P-0-0150 Parameter channel-->Number of clock cycles to get single-turn position or absolute position" + IDN "P-0-0150 Parameter channel-->Number of clock cycles to get multi-turn position" is not equal to 25 or 21 or 13 |
Exchange the parameter. |
|
Further Information |
|---|
|
AX5000_IDN-Description: "P-0-0150" |