Circuit diagram
| |
Serious risk of injury! Due to the DC link capacitors dangerous voltage (> 890VDC) may persist at the DC link contacts “ZK+ and ZK-“and “RB+ and RB-“ after the servo drive has been disconnected from the mains supply. After disconnecting the servo drive wait at AX5160/AX5172; 15 minutes, at AX5190/AX5191; 30 minutes and at AX5192/AX5193; 45 minutes and measure the voltage at the DC link contacts ZK+ and ZK-. The device is safe once the voltage has fallen below 50 V. |
Connection:
- Connect the protective conductor connection of the mains choke with the PE rail.
- Connect the connecting cable of the mains choke to the appropriate terminals of the servo drive.
- Connect the mains choke to the supply network.