SP210 MC

Mechanical data	1-stage
Ratio	3	4	5	7	8	10
Efficiency under full load ŋ [%]	97
Running noise L_PA[dB] at n1 = 3000 rpm without load	≤ 64
Service life L_h [h]	> 20000
Weight [kg] Depending on the clamping hub diameter and selected adapter plate	56
Mass moment of inertia J₁ [kgcm²] Based on the drive Letters = specification of the clamping hub diameter
N = 55 mm	139	94.30	76.90	61.50	61.50	53.10
Torques and speeds
Rated torque at the output T_2N [Nm] at n_1N	960	1260	1141	1169	960
Maximum acceleration torque T_2B [Nm] Maximum 1000 cycles per hour	1200	2000		1700	1200
EMERGENCY STOP torqueT_2Emer [Nm] Possible 1000 times during the service life of the gear unit	5900
Nominal input speedn_1N [min^-1]	2250	2500	3500
Maximum input speed n_1Max [min^-1]	3400	6000
Idle torque T₀₁₂ [Nm] Based on the drive	12	11	8.40	5.60		3.60
Torsion and forces
Maximum torsional backlash j_t [arcmin]	Standard ≤ 4 / Reduced ≤ 2
Maximum torsional rigidity C_t21[arcmin]	400
Maximum axial forceF_2AMax[N] In relation to the shaft center at the output	30000
Maximum lateral forceF_2QMax[N] In relation to the shaft center at the output	21000
Maximum breakdown torque M_2Max [Nm]	3100
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to +40
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016
Seal	Sealed bearing discs

Mechanical data	2-stage
Ratio	16	20	25	28	32	35	40	50	64	70	100
Efficiency under full load ŋ [%]	96.5
Running noise L_PA[dB] at n1 = 3000 rpm without load	≤ 57
Service life L_h [h]	>30000
Weight [kg] Depending on the clamping hub diameter and selected adapter plate	53
Mass moment of inertia J₁ [kgcm²] Based on the drive Letters = specification of the clamping hub diameter
M = 48 mm	34.50	31.50	30.80	30		29.70	28.50	28.30		28.10	28
Torques and speeds
Rated torque at the output T_2N [Nm] at n_1N	898	728	910	744	1344	929	787	984	960	1360	960
Maximum acceleration torque T_2B [Nm] Maximum 1000 cycles per hour	1680	1800	2000	1680		1920	1040	1300	1200	1700	1200
EMERGENCY STOP torqueT_2Emer [Nm] Possible 1000 times during the service life of the gear unit	5900
Nominal input speedn_1N [min^-1]	3500	4500
Maximum input speed n_1Max [min^-1]	6000
Idle torque T₀₁₂ [Nm] Based on the drive	3.40	3.10	2.90	2.60		2		1.80		1.60
Torsion and forces
Maximum torsional backlash j_t [arcmin]	Standard ≤ 5 / Reduced ≤ 4
Maximum torsional rigidity C_t21[arcmin]	400
Maximum axial forceF_2AMax[N] In relation to the shaft center at the output	30000
Maximum lateral forceF_2QMax[N] In relation to the shaft center at the output	21000
Maximum breakdown torque M_2Max [Nm]	3100
Temperature [°C]
Maximum housing temperature	+ 90
Ambient temperature	-15 to +40
Housing
Properties	Heat-treated steel
Color	Anthracite gray; RAL 7016
Seal	Sealed bearing discs

Further Information